Ford Expedition is a full-size SUV

The Ford Expedition is a full size SUV

Ford Expedition is a full-size SUV (Sport Utility Vehicle), which was developed by Ford Motor Company on the market in 1997 to replace the previous model and presented - Ford Bronco. Ford Expedition SUV Ford's flagship. The current model is the third generation of the car was made in Kentucky with its previous basis of Michigan.

Ford Expedition, as well as all other craft with proper maintenance, in order to achieve full power.

Some of the most important details that need help include good headlights and outdoor rare. Ford Expedition so there is no exception to this service. Rear lights (taillights) rivers and seas are of paramount importance, and each vehicle driver must make sure that everything is working correctly at all times. Replacing rear lights Ford Expedition is often considered a multi-tasking, and many times, looking for people to know how to support. However, this is easily done using the following simple instructions. With a little 'practice, this is likely to become an expert to replace the tail light in all the rivers and seas of vehicles.

Tail light is in the same point behind the vehicle, one in each of the rivers and the sea. The only tool required a T - 20 Torx or socket 9/32. The first step is to complete the entire tailgate, not only the glass, open to expose the optical group. There you will find two or three mounting screws Philippe lighting / lens in place. Remove the cover and set aside. Open carefully now and then the light lens. There are basically three "push in" to keep the lens. You can feel like a plurality of bolts, but if evenly and diagonally to move away from the car, they jump out just fine. There are basically two lamps in the collection of all the rivers and seas.

The top is a signal light bulb stop light / turn lamp and another backup. There are typically two groups of wires when light. The thread is an indispensable light and came counterclockwise and then pulling it. To get rid of all the debris of the lens. Once the surface is clean pop, light new goals and take turn right. Attach the two screws that were put aside. Ford Expedition auto parts stores 4157LL recommended instead of 4157K Sylvania and works fine. This process should take at least ten minutes, and you can start your Ford Expeditions were back on the road. It is always advisable that as soon as they replace a broken tail light. This will avoid the obvious, the wrath of law enforcement, and security reasons. This process should begin with a study of the Expedition Driver easily any Ford.